BEFORE | PENETRATING SEALER

AFTER | PENETRATING SEALER

THE ULTIMATE CONCRETE SEALER

SUPERIOR TECHNOLOGY

Top chemists created a sealer that penetrates deep into the pores of concrete, natural stone, brick, masonry, and more. This deep penetrating concrete sealer also protects the surface from water, winter, and harsh chemicals.

  • Protects Against Freeze/Thaw Damage.
  • Resists Scaling and Popping.
  • Protects Against Salt and Water Damage.
  • Resists Oil and Chemical Stains.
  • Protects From Harmful UV Rays.
  • Will Not Change the Appearance or Texture.
  • Provides an Easy to Clean, Low Maintenance Surface.
Close-up of effects of concrete sealer
Penetrating-Sealer

SEAL YOUR DRIVEWAY, SIDEWALKS, AND PATIO THIS WEEKEND!

This concrete penetrating sealer was developed with Do It Yourselfers in mind using contractor grade ingredients.

  • Just clean your concrete
  • Mix sealer with water
  • Spray concrete waterproofing sealer
  • Return to traffic in 24 hours

WHY THE CONCRETE PROTECTOR?

Concrete is like a giant sponge; it absorbs water, harsh chemicals, UV Rays and de-icers, all of which damage concrete. Sealing your concrete with The Concrete Protector can protect it from all these issues and keep it looking spectacular.

SEE WHY OUR SEALER IS BETTER!

Safe & Environmentally Friendly

Protect your concrete while protecting your family, and the environment. This concrete penetrating sealer is formulated, packaged and delivered with the environment in mind!

  • Safe
  • Environmentally Friendly
  • Zero VOC’s
how-hydrophobic-sealer-works

Concrete Protector Penetrating Sealer is the highest quality hydrophobic concrete sealer on the market today. In addition to its superior performance, it is also formulated, packaged, and delivered with the environment in mind. Compliant with all federal and local VOC laws, Concrete Protector Penetrating Sealer is an environmentally friendly concrete sealing option. Each bottle of Concrete Protector Penetrating Sealer is super-concentrated, with each one quart bottle produces 2 ½ gallons of ready to use sealer. By diluting the sealer 9:1 with water (2 ¼ gallons of water to 1 quart bottle of sealer), you’ll have a concrete sealer that will protect your concrete for years to come. Wash your concrete and spray on! It’s that easy!

EASY MIXING

Pour 2.25 gallons of water (9 quarts) into a five gallon plastic bucket. Open concentrated quart-sized bottle of sealer and pour into the bucket. Mix thoroughly (minute or so) with either a drill and a mixing paddle or a large paint stick. You now have your 2.5 gallons of ready-to-use concrete waterproofing sealer!

APPLYING THE SEALER

Pour the mixed concrete waterproofing sealer into a pump-up pressure sprayer and spray a fine mist onto the surface of the concrete (we use a battery operated pressure sprayer that is attached to a hand cart, but any plastic pump-up pressure should work fine). Apply to the point of almost puddling. Evenly spread the sealer back and forth with a stiff bristled broom to spread-out any runs.

HOW LONG DOES IT LAST?

Our penetrating sealer offers 3 years of excellent protection and ok protection for 2 more years, giving you a sealed concrete surface for a total of 5 years. After this period has elapsed, you should certainly consider resealing your concrete with Concrete Protector Penetrating Sealer. Of course, every case is different, so be sure to do what’s best for your particular situation.

THE CONCRETE PROTECTOR'S PENETRATING SEALER

Unlike acrylic sealers that form a film on the concrete surface, Concrete Protector Penetrating Sealer chemically alters the concrete’s surface by glassifying it to create a clear waterproof resistant membrane protecting the surface from water penetration that causes damage. At the same time, the appearance (color) and texture of the surface is not changed in any way like other sealers do.

The-Concrete-Protector-Wash-and-Seal-275x280_CutOut

HOW TO CLEAN AND SEAL CONCRETE

STEP 1 WASH CONCRETE

We recommend using a professional pressure washer (we sell them or you can rent them), with a degreaser (Dawn Dish Soap is one of the best).

STEP 2 MIX SEALER

This is how we quickly make 2.5 gallons of sealer:

  • Pour 2.25 gallons of plain tap water (9 quarts) into a five gallon plastic bucket.
  • Open concentrated quart-sized bottle of sealer and pour into the bucket.
  • Mix thoroughly (minute or so) with either a drill and a mixing paddle or a large paint stick.
    You now have your 2.5 gallons of ready-to-use sealer!

STEP 3 APPLYING THE SEALER

1. Pour the mixed sealer into a pump-up pressure sprayer and
2. If surface is not dry is a few areas - use a leaf blower to dry. Spray a fine mist onto the surface of the concrete (we use a battery operated pressure sprayer that is attached to a hand cart but any plastic pump-up pressure should work fine).
3. Apply to the point of almost puddling
4. Evenly spread the concrete waterproofing sealer back and forth with a stiff bristled broom to spread-out any runs.

Additional Info

  • You'll get more square foot coverage on less windy days.
  • Product sprays milky white and dries clear in a few minutes.
  • Wait 24 hours before vehicle traffic.
  • Temps: Good temperature range at time of application - between 50 - 95 degrees Fahrenheit: 50 degrees Fahrenheit on the low end (with no freezing that night) and no warmer than 95 degrees Fahrenheit on the high end.
Shopping Cart

Questions? Call Our Experts
1-866-784-3308