SANI-TRED® pond sealing products are the most unique, versatile and easy to apply pond sealing products on the market. Repair of Garden ponds or water fountains made easy with SANI-TRED® concrete pond sealer. Our pond sealing products are NOT ‘pond paints’ they are permanently bonding, permanently flexible and can never bubble, chip, peel, crack, delaminate or leak for the life of the structure. Sani-Tred pond sealing products are over 4 times stronger than ‘seemingly similar’ products coupled with many more unique qualities and abilities others don’t have which make Sani-Tred products superior to the rest. Sani-Tred’s Unique Product Qualities are: Flexible Penetration Technology®, Permanent Elongation®, and Elongation Memory Technology®
Sani-Tred products are far superior to any liner for many reasons
- Liners are not permanently bonded. Sani-Tred is a ‘permanently bonded system’.
- If a liner has just one flaw, the entire system fails. Sani-Tred can be gouged and scraped
without ever creating a leak.
- Water is allowed to migrate behind liners; it is impossible for water to come between the
substrate and a Sani-Tred seal.
- Liners have seams, Sani-Tred is ‘seamless’.
- Liners have temporary seals around plumbing and fixtures; Sani-Tred creates a
permanent seal around plumbing and fixtures.
- Liners are typically black; Sani-Tred comes in a variety of colors (including black).
- It is commonly known that one must take great care when setting stones on a liner.
Liners are easily damaged and pond liner repair is temporary. Sani-Tred is rated for
vehicle traffic. Even boulders do not threaten a Sani-Tred seal.
Provides Complete Water Tight Integrity Regardless of Freeze-Thaw Cycles
Due to unique technical breakthroughs in polymer chemistry, a complete pond or fountain waterproofing, crack and freeze damage repair system is both available and affordable for the home owner or commercial fountain or pond owner! Put an end to pond leaking forever with this polymer pond sealer. No other products on earth can duplicate this transformation, because no other single component coating product may be applied at great thickness like LRB (Liquid Rubber Base), molecularly bond to themselves and retain negative hydrostatic pressure. Additional advantages are that the coating and repairs remain flexible, are permanently bonded to the surface and will expand and contract with the concrete during temperature extremes to remain water tight! Sani-Tred is the only waterproofing system that can completely seal any pond or fountain permanently, no matter how damaged or deteriorated. SaniTred products have repaired many ponds and fountains that have been determined by experts as unrepairable with no recourse but to destroy or fill in the pond or fountain and start over!
If you feel that your pond or fountain is beyond hope, call or email and we will assist you and teach you how to seal or waterproof a pond. Learning how to seal a pond is easy! If you have a pond or fountain that is constructed with a concrete, brick, or stone bottom you can easily and permanently transform and seal the pond or fountain using Sani-Tred pond sealing products to eliminate the need to regularly replace liners and eliminate UV damage, puncture and lateral leaking problems associated with temporary liners.
SaniTred LRB (Liquid Rubber Base), a single component polyurethane product, has the unique ability to cure at any thickness of application without gassing and molecularly bonds to itself new-to-old. These chemically unique features, when coupled with SaniTred PermaFlex’s ability to penetrate concrete, creates a waterproofing system which can retain almost sixty times the amount of negative hydrostatic pressure normally found in residential or commercial ponds and fountains. These are some qualities of SANI-TRED® products that set SANI-TRED® above all other products in the field of pond or fountain waterproofing and DIY concrete pond repair. A perfect pond seal is easy
to achieve with the right pond sealant.
NOTE: For all pond or fountain waterproofing installations, where retaining negative hydrostatic pressure is required, it is critical that all “scrim coatings”, old paints, sealers, waterproofing agents etc, must be removed to allow Sani-Tred products to penetrate and bond
to the original concrete surfaces.
Cracked, leaking or damaged structures are easily and permanently repaired, with even major repairs and construction flaws being repaired and hidden by SaniTreds’ versatile and flexible qualities. The need to annually patch and repair, along with the inconvenience and expense, is no longer necessary with SaniTreds’ permanent flexible bonded repair system. If the original Sani-Tred surface is damaged, it is easily spot repaired without complete recoating. If damaged, repairs weld to themselves, new to old with a molecular bond which is unique to the coatings industry. Pond repair and water fountain repair is now easy. Any do it yourself water fountains or DIY pond can be sealed forever.
The SANI-TRED System is the permanent pond and fountain waterproofing and repair product