Sealers and Topcoats
Showing all 3 results
Add to cartMORE INFOSLV P90 2 Gallon Topcoat Kit
$236.18Sani-Tred’s SLV P90 is a Slow Setting, Low Viscosity and low odor, 90% Solids Polyaspartic Polyurea. SLV P90 is the lowest odor Polyaspartic we have ever produced it offers the best features of Polyaspartics: fast return to service, high chemical resistance, and UV stability with a user-friendly slower setup time which allows rollers marks to lay out flat. SLV P90 has excellent penetration and bonding strength and is perfect for use in all areas where VOC limits are a concern, including Southern California. SLV P90 can provide a non-yellowing, wear resistant finish to your Sani-Tred or Graniflex project that will last for years to come.
- Solvent Based Polyaspartic Polyurea
- 90% Solids Content – Low Odor
- Longer Pot Life High Gloss & Fast Curing
- High Chemical and wear resistance
- UV Stability for outdoor projects
- Tintable for custom color options
- Two Component – 1:1 Mix Ratio
- Add to cartMORE INFO
WB-221 Satin Topcoat 1.5 Gallon Kit
$189.40Sani-Tred’s WB-221 is a satin finish two-component, water-based polyurethane topcoat. WB-221 has excellent adhesion as well as abrasion resistance, and chemical resistance. WB-221 is low VOC and low odor and extremely user-friendly. WB-221 can provide wear resistant finish to your Sani-Tred or Graniflex project that will last for years.
- Water Based Urethane
- 1.5 Gallon Kit
- Low Odor
- Matte Finish
- High Chemical and wear resistance
- Two Component – 2:1 Mix Ratio
- Mix 2 parts A to 1 Part B
- Add to cartMORE INFO
WB-421 Gloss Topcoat 1.25 Gallon Kit
$157.45Sani-Tred’s WB-421 is a glossy two-component, water-based polyurethane topcoat. WB-421 has excellent adhesion as well as abrasion resistance, and chemical resistance. WB-421 is low VOC and low odor and extremely user-friendly. WB-421 can provide wear resistant finish to your Sani-Tred or Graniflex project that will last for years.
- Water Based Aliphatic Urethane
- 1.25 Gallon Kit
- Low Odor
- High Gloss
- High Chemical and wear resistance
- Two Component – 4:1 Mix Ratio
- Mix 4 parts A to 1 Part B
